Desulfurization process of red rust steel plate

Generally corroded steel plates often use desulfurization processes in the process of completing manufacturing. How is the desulfurization process for corroded steel plates carried out? In general, the specific progress of the desulfurization process of the weathering board is as follows:

1, can maintain the high efficiency of flue gas desulfurization and operation efficiency

Due to the multiple cycles of the desulfurization catalyst in the flue gas desulfurization tower, the contact time between the desulfurization catalyst and the dust is close to 30min, which further improves the utilization rate of the desulfurization catalyst and the high efficiency of flue gas desulfurization.

Water fountain 

The prototype projects and commercial operation systems in the UK and France that have been put into use confirm that for the flue gas desulfurization production process of dust biomass boilers, the flue gas desulfurization efficiency can be higher than 95% when CA/S=1.1-1.4.

Therefore, for the dust flue gas desulfurization and dust removal transformation project of this latest project, the production process can fully take into account the control requirements of SO2 and flue gas in the future, and can relax the requirements of coal test (sulfur content rate).

2, flue gas desulfurization desulfurization catalyst can be primary

In the original article, the desulfurization catalyst used locally produced and processed qualified lime powder. After the actual operation, the local calcium carbide slag powder which meets the requirement of FGD index value can be used as the desulfurization catalyst considering the operation cost.

Weathering steel fire pit with water

3, environmental governance

The production process does not cause waste water in the whole process of flue gas desulfurization.

4. Professional advantage

Screen panels